TS 80 Classic Limo Tender

Availability:

LEASED – Lease with Option to Purchase (36 months)

Name:

Formosa

Builder:

Philippe Cabon

Location:

San Diego, CA

LOA:

8.00 m / 26.3 ft

Beam:

2.58 m / 8.5 ft

Draft:

0.55 m / 1.8 ft

Displacement:

3 550 kg / 7836 lb

Fuel Tank:

240 litres / 63.4 US Gal

Mechanical:

Engine Yanmar 6BY2-260 Hp
Stern Drive ZT350
Maximum engine power 260 Hp
Maximum speed with 260 Hp 35 kts

Maximum number of passengers:

Description:

The TS80 Classic Limousine Tender is a masterpiece destined to complement the elegance of the any super yacht or as a stand on shore boat. Crafted with meticulous attention to detail, this vessel boasts naval architecture by Philippe Cabon.

With ample space to accommodate 10 to 12 passengers and a dedicated crew of 2, every journey becomes a voyage of comfort and relaxation.

Hull & deck structure

Hull, deck, and roof: Vinylester resin vacuum process infusion. Materials are glass fiber and PVC foam with local reinforcement. White gel coat.
Bulkheads and longitudinal girders comprised of PVC foam / glass fiber.
All bondings made with structural adhesives.

Removable hard top

Hardtop was built in carbon fiber under vacuum.
Smoked Macrolon windows glued with a durable polyurethane system.

Engine and propulsion

Upgraded to Yanmar 6BY2-260 Hp engine, electronic injection, Stern Drive ZT350.
Fuel filter and separator, remote shut-off valve, 240 liters aluminum alloy fuel tank with 50 liters reserve, fuel gauges.
Engine control panel, fuel & water gauges, throttle on the steering console.
Carbon fiber steering wheel, cable transmission.
Ventilation with electric fans.
Engine compartment sound insulation in perforated aluminum panels covered by sound-deadening foam.

Helm station

Carbon finishes on the dashboard.
Carbon steering wheel, throttle, and engine controls.
Electronic.
Compass with light.
Windlass control panel.
Retractable glass windscreen.

Metalwork

All metal fittings in polished 316L stainless steel.
Handrails, hinges, mounting plates, various fittings.
A4 Stainless steel screws, nuts & washers.

Electricity

2 x 12 V – 135 A AGM batteries.
10 function watertight electric board on the steering console.
Circuit protected by thermal circuit breaker and fuses.
Battery charges via the engine alternator.
Anodes set.
All interior lights with LEDs.
Regular navigation lights (LED).
Light in the engine room.

Seat cushions

Complete set of seat cushions in 80mm thickness closed-cell (60 mm high and 20 mm low density) polyurethane foam covered with leather.
Cushions held in place by stainless steel fasteners.
Storage for a life jacket under each seat.

Teak deck

6mm thick, 56mm wide, natural teak from sustainable sources.

Paint

All the hull and deck painted with All Grip system.
Waterline strip.

Plumbing system

2 automatic electric bilge pumps with a buzzer alarm.
1 water tank with pump and shower at the stern in a small box.

Electronics

1 VHF Icom IC-M411, 25 W recessed in the steering console.
1 radio CD, MP3 with antenna AM FM and 4 speakers 40 W.
GPS Ray marine package with antenna, Display 9’.

Anchoring equipment

Anchor locker at the bow with automatic removable anchor roller.
5kg plate stainless steel anchor, 25 m chain, clench point.
Electric windlass and panel control at the helm station.

Mooring equipment

4 foldable mooring cleats (2 fwd, 2 aft).
6 fenders and socks.
4 ropes 10 meters long.

Standard equipment

8 x blue long-life LED cockpit lights (interior and exterior).
Towing chain plate.
Safety equipment for 10/12 people.
1 removable stainless-steel flagpole.
1 removable hand poles and plugs.
1 swim ladder.
2 boat hooks (Aluminum and telescopic).

Lifting device

Tender lifting bridles for 1 point.
3 stainless steel pad eyes fastened in the cockpit sole.
1 wire sling-bridle.
3 mooring eyes (1 transom and 2 forward).

Hull

Natural wood glued with epoxy under vacuum on the hull above the waterline.
Anti-UV epoxy and fiberglass skin.
Polyurethane high gloss varnish.